Displaying System Information
4-13
9621-A2-GB20-30
August 1997
LMI Reported DLCIs Status
Use this procedure when the FrameSaver access unit is configured as the user
side of LMI (see the frame relay LMI Personality option). Typically, these statuses
are available on the network interface.
"
Procedure
To display LMI Reported DLCIs Status:
1. Use the following menu sequence:
Main Menu
→
Status
→
LMI Reported DLCIs
2. Select the desired interface (Network, Port-1, Port-2, or BRI-B1).
3. Select the desired DLCI.
Field
Status
What It Indicates
DLCI
16 through 1007
Identifies the Local Management
Interface-reported DLCI numbers
assigned to the selected interface –
the identifying number assigned to
the path between two frame relay
access unit’s ports.
DLCI statuses are listed in
ascending order ( i.e., lowest
number first ).
Status
Active
Inactive
Deleted
1
New
1
LMI-reported status of the DLCI:
H
Whether the DLCI is active
(capable of carrying data) in the
frame relay network,
H
Whether it is inactive,
H
Whether it has been deleted by
the frame relay network,
or
H
Whether it has been created by
the frame relay network.
1
Appears for 10 seconds only, before the network changes Deleted to Inactive
and New to Active.
