Paradyne BitStorm 2400, Руководство пользователя, Страница: 37 / 90

3. Using the Asynchronous Terminal Interface
2400-A2-GB20-10 December 2002
3-9
Serial Configuration Screen
The Serial Configuration screen is shown in Figure 3-7 . This screen allows you to
modify the baud rate. Once you select APPLY or SAVE, the baud rate is modified
immediately, and you will have to modify your terminal or emulator to communicate
with the BitStorm 2400.
The default and recommended baud rate is 19200, which is the rate used by the
boot code. If you change the operating system baud rate to a different value, you
may create a situation where only the initial boot messages are readable, or only
messages sent after the boot process is complete are readable.
This screen also displays read-only information about the serial interface.
Figure 3-7. Serial Configuration Screen