manualshive.com logo in svg

Paradyne 1813, Руководство пользователя, Страница: 124 / 135

Поделиться
Скачать
Paradyne 1813 Скачать руководство пользователя страница 124

Command Line Interface User’s Guide 

4.

 

The following message pops up if the software upload is successful. 

 

putting app to xxx.xxx.xxx.xxx : 

ÀÀÀ

 [octet] 

Sent bytes in seconds 

 

tftp> connect 172.16.4.16 

connected to : 172.16.4.16 

tftp> binary 

mode set to octet 

tftp> put app sw2003.bin 

 

putting app to 172.16.4.16 : sw2003.bin [octet] 

 

Sent 983040 bytes in 3 seconds 

tftp>    

 

7.2

 

Auto Upgrade 

When the modem is powered on, it will automatically execute the following command: 

 

[root @ home] tftpAuto –o YES  tftp.modem-update.com 

 

OR 

 

[root @ home] tftpAuto –o YES  168.95.1.1 

 

The TFTP Server will check the firmware and configuration version. 

If the version is older than the version in the TFTP Server, then the TFTP server will download 
the updated firmware and configure files from the modem. 

7.3

 

Uploading the configuration file 

To upload the configuration file, use the 

put param

 command. 

 

124                                                                                                                                                                      1800-A2-GB20-00 

Содержание 1813








































































































































Отзывы:

Нет отзывов