SAFE
PROTECTOR
(950)
INSTRUCTIONS
Application
The Paradox Safe Protector is designed
for security applications on metallic
cabinets, cash-boxes, safe and metallic
doors. It can also be applied successfully
to protect concrete walls of bank
depositories and other premises requiring
high security protection level.
The Paradox Safe Protector is installed
directly on the protected surface and
reacts to the frequency spectrum of
vibrations caused by surface breaking,
cutting, and heavy knocking by grinders,
electric arc welders, and oxyacetylene
torches. It also reacts to knocking, filing
and drilling on the protected surface.
Since effective operation is contingent on
close contact between the safe protector
and the protected surface, this surface
must be well cleaned prior to installation.
The safe protector should then be tightly
attached to the safeguarded surface with
3 screws.
Installation
1. Remove center screw (
A
) on safe
protector.
2. Find a clean, dry, flat surface (
B
) on which
to mount the Paradox Safe Protector.
To reduce false alarms avoid
installation near:
• Electric motors,
transformers, fans, air
conditioners in close
proximity of the safe
protector
• Ultrasonic safe protectors
which may emit a signal
within the frequency range of
the safe protector
3. Install the 3 screws to mount the safe
protector ensuring that the screws are
driven in at a 120 degree angle.
4. Connect a 4 or 6-wire cable to the safe
protector and connect it as follows (see
Figure 2):
Tamper recognition:
1-2
Alarm contacts:
3-4
Power supply (+):
5
Power supply (-):
6
5. Set unit sensitivity according to
application:
100%: Jumper on Q and M
70%:
Jumper on Q and P
50%:
Jumper on N and P
40%:
Jumper on N and M
30%: No
jumper
6. Re-install the cover on the safe
protector.
7. Perform functional tests simulating a
burglary signal in the supervised area.
Example: lightly scratch the surface
around the safe protector with a
screwdriver or hit the surface near the
safe protector.
Specifications
•
Supply voltage: 10 - 16Vdc
•
Current consumption:
Standby: 16mA (+/- 10%)
•
Alarm: 12mA (+/- 10%)
•
Adjustable sensitivity:
100%: Jumper on Q and M
70%:
Jumper on Q and P
50%:
Jumper on N and P
40%:
Jumper on N and M
30%: No
jumper
•
Diameter of protected surface: 2.50m
•
Alarm relay: 28V/150mA
•
Tamper output: Normally closed 24V/
0.2A
•
Temperature range: -20°C to +50°C
•
Maximum humidity: 95% at 25°C
•
Dimensions: 109 x 64 x 23mm
•
Weight: 260 grams
780 Industriel Blvd., Saint-Eustache (Quebec) J7R 5V3 CANADA
Tel.: (450)491-7444 Fax: (450) 491-2313
www.paradox.ca
PRINTED IN CANADA - 10/2004 SFPR-BI04
Figure 1
Figure 2
Warranty
Paradox Security Systems Ltd. ("Seller") warrants its products to be free from defects in materials and workmanship
under normal use for a period of one year. Except as specifically stated herein, all express or implied warranties
whatsoever, statutory or otherwise, including without limitation, any implied warranty of merchantability and fitness for
a particular purpose, are expressly excluded. Because Seller does not install or connect the products and because
the products may be used in conjunction with products not manufactured by Seller, Seller cannot guarantee the
performance of the security system and shall not be responsible for circumstances resulting from the product's
inability to operate. Seller obligation and liability under this warranty is expressly limited to repairing or replacing, at
Seller's option, any product not meeting the specifications. Returns must include proof of purchase and be within the
warranty period. In no event shall the Seller be liable to the buyer or any other person for any loss or damages
whether direct or indirect or consequential or incidental, including without limitation, any damages for lost profits
stolen goods, or claims by any other party, caused by defective goods or otherwise arising from the improper,
incorrect or otherwise faulty installation or use of the merchandise sold.
Notwithstanding the preceding paragraph, the Seller's maximum liability will be strictly limited to the purchase price of
the defective product. Your use of this product signifies your acceptance of this warranty.
BEWARE: Dealers, installers and/or others selling the product are not authorized to modify this warranty or make
additional warranties that are binding on the Seller.
© 1999-2004 Paradox Security Systems Ltd. All rights reserved. Specifications may change without prior notice. One
or more of the following US patents may apply: 6215399, 6111256, 5751803, 5721542, 5287111, 5119069, 5077549,
5920259 and 5886632. Canadian and international patents may also apply. Safe Protector is a trademark or
registered trademark of Paradox Security Systems Ltd. or its affiliates in Canada, the United States and/or other
countries.
A
closing cover screw
vis de fermeture du boitier
B
The surface must be well
cleaned and smooth.
La surface doit être propre
et lisse.
C
fixation screw
vis de fixation
D
wiring
câblage
E
cover
couvercle
F
anti-tamper switch
anti-sabotage
G
PCB
carte de circuits imprimés
Never try to turn the large
screw-shaped cap on the safe
protector./ Ne jamais tenter de
dévisser la vis de fixation de
la chambre de détection.
A
B
C
D
E
F
G
H
back
dos
I
detection chamber
chambre de détection
H
I
Connection/Branchement
1-2
: tamper recognition/contact alarmes
sabotage
3-4
: alarm contacts/contact alarmes
détection
5
: power supply/alimentation (+)
6
: power supply/alimentation (-)
LED: alarm indication
DEL : indication d’alarme
Jumper/Cavalier
