Paradox NV75M Скачать руководство пользователя страница 1

NV75M-EI00  04/2016

paradox.com

NV75M/MX

Installation Manual V1.0

16 Meter Indoor Dual 

Mironel Optics with Anti-Mask 

and Pet Immunity Dual Detector

General Description

The NV75M/MX is an indoor industry-leading detector 
providing superior 16 meter detection with rock solid stability 
thanks to the revolutionary dual Mironel Mirror/Fresnel PIR 
optics. Combined with Paradox true Pet Immunity and best-
in-the industry active Anti-Mask technology (EN Grade 3). 
The NV75M/MX provides an unmatched high security 
solution for any indoor installation. 

Installing the NV75M/MX (Fig. 1)

Please Read

Installation Height:

Pet Immune ON

 - 2.0m/6.6ft to 2.4m/7.8ft

Pet Immune OFF

 - 2.0m/6.6ft to 2.8m/9ft (lever down)*

*For installations higher than 2.6m, when needed, tilt 
the detector down a few degrees for best detection 
results; use of a bracket is recommended.

Power Up (30 sec.):

Powering up the detector takes about 30 seconds, 
indicated with green/red flashing; indicates PIR 
stabilizing.

Anti-Mask Calibration: 

Once detector is stabilized, as mentioned above, open 
and close the tamper to initiate. Anti-Mask calibration 
may take up to 60 seconds. Keep away from the 
detector, at least 2 meters / 6 feet during calibration, 
indicated by flashing green/red LED. Once completed, 
the detector is ready.

Wall Mount

Bracket Mount 

Creep Zone/Pet Selection

Remove detector assembly as described in Fig. 1. When 
selector is UP, Pet Mode; when DOWN, Creep Zone is 
active and there is no Pet Immunity. Above 2.4m Pet 
Immune should be OFF (lever down Pet OFF, see 
installation height note*.

Dip Switch Settings

Sensitivity Settings

LED Display

Cover Tamper

Step 1

Step

 

3

NV75MX

NV75M

Step 2

TMP

COM

ALM

COM

AM

+

YEL GRN

1 2 3

BLK RED

(Table 1)

Table 1

DIP SWITCH

OFF

ON (DEFAULT)

1. LED

OFF

ON

2. EDGE

DUAL

SINGLE

3. PET IMMUNE

OFF

ON

Feature

LED Status Indicator

Tamper open

Green: ON for 0.3 seconds every 30 
seconds 

PIR sensitivity level 
setting

Green: Flashes 1-5 times according 
to the selected level

Alarm detection

Red: ON for 3 seconds

Booting/Tamper 
close

Green/Red alternating flashes
for 45 seconds

Anti-mask detection  Flashes orange rapidly (pre-alarm 

state) and then constant orange 
when in alarm.

Wall Mount x6

Bracket Adjustment 
Screw Opening

Corner Mount 
x4

Tamper Screw 
Wall/Corner 

Wiring Entry x2

1

2

3

4

5

UP - Pet 

DOWN - Creep

7m

9m

16m

13m

11m*

Отзывы: