Paradox MG5050, Руководство по программированию

Страница: 37 / 72

Magellan / Spectra SP 37
Reset System Report Codes
Special Arming Report Codes
(Default = FF)
Special Disarming Report Codes
(Default = FF)
Special Alarm Report Codes (
Default = FF
)
System Trouble Report Codes (Default FF)
System Trouble Restore Codes (Default FF)
[967] Reset Report Codes
Option OFF ON
[3] Reset arm/disarm/alarm report codes to default*

Disabled

Enabled
[4] Reset trouble report codes to default*

Disabled

Enabled
[5] Reset system special report codes to default*

Disabled

Enabled
* Ensure all other options are deselected. Press [
ENTER
] to reset the respective set of report codes before exiting the section.
Section Data Description Section Data Description
[860] ___/___ Auto-arming [861] ___/___ Quick arming
___/___ Late to close ___/___ Arming via PC
___/___ No movement ___/___ Arming with Keyswitch
___/___ Partial arming ___/___ N/A
Section Data Description
[862] ___/___ Cancel auto-arm
___/___ Disarming via PC
___/___ Cancel alarm with user or WinLoad / BabyWare
___/___ Cancel paramedic
Section Data Description Section Data Description
[863] ___/___ Emergency panic [864] ___/___ Zone shutdown
___/___ Auxiliary panic ___/___ Duress
___/___ Fire panic ___/___ Keypad lockout
___/___ Recent closing ___/___ Paramedic alarm
Section Data Description Section Data Description
[865] ___/___ N/A [868] ___/___ Module power fail
___/___ AC failure ___/___ Module low/no battery*
___/___ Battery failure ___/___ Wireless zone low battery*
___/___ Auxiliary supply ___/___ Wireless zone supervision lost*
[866] ___/___ Bell output overload [869] ___/___ Wireless module supervision lost*
___/___ Bell output disconnect ___/___ Wireless module tamper*
___/___ Timer loss ___/___ N/A
___/___ Fire loop trouble ___/___ N/A
[867] ___/___ Fail to communicate
___/___ RF jamming *Does not apply to SP4000 systems
___/___ Module lost
___/___ Module tamper
Section Data Description Section Data Description
[870] ___/___ TLM [873] ___/___ Module power fail
___/___ AC failure ___/___ Module low/no battery*
___/___ Battery failure ___/___ Wireless zone low battery*
___/___ Auxiliary supply ___/___ Wireless zone supervision lost*
[871] ___/___ Bell output overload [874] ___/___ Wireless module supervision lost*
___/___ Bell output disconnect ___/___ Wireless module tamper*
___/___ Timer loss ___/___ N/A
___/___ Fire loop trouble ___/___ N/A
[872] ___/___ Fail to communicate
___/___ RF jamming *Does not apply to SP4000 systems
___/___ Module lost
___/___ Module tamper