Paoli DP05-34B, Руководство по эксплуатации

Страница: 56 / 68

56
Interval Maintenance task Personnel
Before and after every use n Clean.
n Check surfaces, warning symbols and
pictograms for damage.
n Check the power cable, power plug and
fasteners of the battery charger for
damage.
n Check the impact wrench socket and
spring clip for damage and correct ope-
ration.
n Check the reaction arm and circlip for
damage and correct operation.
n Check for leaks.
User
Every 3 months
n In the event of extreme oper-
ating conditions (e.g. dust, dirt)
n In the event of high frequency
of use, multi-shift operation
n In the event of constant work
in the upper torque range
n In the event of soft bolting pro-
cesses
n Drive motor
Perform service as stipulated by the
motor manufacturer.
n Perform the software update.
n
n
Planetary gearbox
Perform service as stipulated by the
manufacturer.
Lubricate.
Nutrunner
Exchange damaged markings.
Recalibrate. Determine characteristics.
Create torque chart/factory certificate.
n Accessories
Check for damage; exchange.
n Exchange damaged markings.
PAOLI
service
Every 6 months
n In the event of standard oper-
ating conditions
n In the event of average fre-
quency of use
n In the event of work in the
medium torque range
Every 12 months
n In the event of low frequency
of use
n In the event of work in the low
torque range
Spare parts must meet the technical requirements specified by
PAOLI.
This is always ensured by original spare parts. A war-ranty
can only be provided for original spare parts supplied by
PAOLI.
The installation or use of other spare parts can, under certain cir-
cumstances, adversely alter the specified design properties and,
consequently, impair active or passive safety.
Any liability and warranty for damage resulting from the use of
parts other than the original spare parts and accessory parts is
excluded.
Have at least the following information about the nutrunner to hand
to enable quick and easy processing:
Accessories, spare parts and wear
parts
Performing maintenance