Paoli DP05-34B Скачать руководство пользователя страница 37

Страница: 37 / 68

Create passwords for users.

Uphold safety, occupational safety and health protection when

using the nutrunner and convey this to users.

Identify damage on the nutrunner and arrange for repairs or get

in touch with the manufacturer.

Instruct users in the proper manner.

The operator is the person who operates the nutrunner for com-

mercial or economic purposes themself, or makes it available for a

third party to use, and who bears legal responsibility for the product

vis-à-vis protection of personnel and third parties during operation.

Certain work may only be performed by

PAOLI

service or by

personnel authorised by Maschinenfabrik Wagner GmbH & Co.

KG. Other personnel are not authorised to perform this work. Con-
tact

PAOLI

service or authorised

PAOLI

partners regarding

performance of the work that is due.

Contact:

www.paoli.net

WARNING!

Danger of death for unauthorised persons due

to dangers in the danger zone and work area!

Unauthorised persons, who do not meet the

requirements described in this manual, are not

aware of the dangers in the danger zone. There is

therefore a danger of serious injuries or even

death for unauthorised persons.

– Keep unauthorised persons away from the

danger zone and work area.

– If in doubt, address the respective persons and

instruct them to leave the danger zone and work

area.

– Suspend work while there are unauthorised per-

sons loitering in the work and danger zone.

Operator

PAOLI

service

Unauthorised persons

Before you begin

Содержание DP05-34B





































































Результаты поиска

Содержание DP05-34B

Отзывы:

Похожие инструкции для DP05-34B

Бренды по названию

Популярные бренды

Paoli DP05-34B, Руководство по эксплуатации

Результаты поиска

Содержание DP05-34B

Отзывы:

Похожие инструкции для DP05-34B

Бренды по названию

Популярные бренды