Pantum P2210 Series, Руководство пользователя

Страница: 54 / 89

44
2.2 The computer is not connected to wireless network Input the SSID (case sensitive) and
password of access point (wireless router) in the interface below. Complete configuration according
to interface prompt.
Note
：
• If you do not know the SSID of access point (wireless router), please click “Print
Wireless Network Information Page” to view the SSID of the needed access point
(wireless router).
• If the printer cannot be used normally after wireless network setup is finished, please
install the drive again.
5.1.2. How to disable the WiFi network connected
Please complete the wireless network connection in infrastructure mode according to above steps.
If connected, the WiFi indicator on the status control panel will be always on; now if you want to
disconnect it, please press and hold this key for more than 2 seconds (the WiFi indicator will be off ).
5.2. WiFi Direct mode
You can connect wireless client (including the computer and mobile device with wireless network
feature) to wireless network printer without using the access point (wireless router).
5.2.1. Preliminary preparations
1. Printer with the WiFi Direct feature.
2. Wireless client (including computer and mobile device with wireless network feature).
5.2.2. WiFi Direct connection
1. Turn on printer power.