Instruction Manual VET LIFT
Page 27 of 27
Version 2.02
Special warnings
Trapping or pinching is possible at various spots on the product.
Particular attention must be paid that:
•
Parts of the
patient’s body are not located within this range
•
Parts of the user
’s body are not located within this range
or
•
Body parts of third persons are not located within this range.
DURING CLEANING AND MAINTENANCE WORK, DISCONNECT THE PRODUCT FROM
THE POWER SOURCE TO AVOID THE RISK OF ACCIDENTAL ENTRAPMENT.
Local distribution of maximum load
Despite the exceptionally stable and robust design of the table, which enables a
particularly high maximum load for this product (as specified in the Technical
Specifications), it is essential to ensure that loads are distributed evenly over the table
surface at all times. High point loads must be strictly avoided.
Product warranty
panno-med provides a warranty for the proper functioning of the product from the date of
sale up to 24 months. The buyer must notify the manufacturer of any damage under
warranty immediately. The warranty is valid only upon submission of the original invoice.
Exclusion of warranty:
•
The operator has not complied with the Instructions Manual supplied with the
product.
•
An unauthorized person has interfered in the product.
•
The operator has improperly and negligently handled the product.
•
Non-original parts were installed in the product.
•
The damage occurred during transportation after the product was handed over to
the buyer.
For all further questions regarding the product, please feel free to contact our
authorized distributors.
Date of publication: 11th August 2021
Содержание VET LIFT 7H9.6P1
