BA_PH_245-100-300_EN_06-22.docx
59
18.5
Maintenance Plan
Activity
da
ily
we
ekl
y
mont
hl
y
annua
lly
Cleaning the machine
X
Check that the extraction system is fully functional before starting work.
X
Inspect electrical equipment and components for externally visible damage
and have this repaired by a qualified electrician if necessary.
X
Check drive belt condition.
X
Check drive belt tension.
X
Check all sliding and rolling parts for smooth running and lubricate with a
thin-bodied oil if necessary.
X
Apply a few drops of oil to the threads of the clamping & adjustment levers.
X
Clean swivel segments from resin and wood residues and lubricate with a
thin-bodied oil (e.g. Neoval).
X
Lubricate the milling spindle bearings at the marked points
(see section
X
Check the milling fence for damage and replace damaged parts if necessary.
X
Replace the lubricator of the swivel adjustment (for detailed procedure see
section
X
Check the TAPOA 1639 ring fence for damage
and replace damaged parts if necessary.
Always before use
In addition to the maintenance plan, please also follow the section
19.2 “Lubrication Plan”.