Panerai SPECIAL EDITIONS Radiomir, Инструкция по эксплуатации

Страница: 12 / 57

S
ETTING THE TIME
1. Raise the lever of the device protecting the winding crown
(A)
and pull out
the winding crown
(B)
to the second click
(position 2)
.
2. Set the correct time.
3. Return the winding crown
(B)
to the initial position
(0)
and close the lever of
the device protecting the winding crown
(A)
.
For a rapid change of the time, start from
position 1
. In this position the hour
hand
(C)
moves in steps of one hour.
S
ETTING THE DATE
The Luminor Submersible 1950 3 Days Automatic Bronzo watch has a gradual
date change mechanism, a process which takes about 3 hours to complete:
from 10 p.m. to 1.00 a.m., with a margin of ± 30 minutes. This particular
method of changing the date is inspired by the mechanical tradition of Swiss
watchmaking, and it allows the date to be changed in both directions, moving it
either forwards or backwards.
To set the date indicated, proceed as follows:
1. Raise the lever
(A)
of the device protecting the winding crown and pull out
the winding crown
(B)
to the first click
(position 1)
. Turn it clockwise or anti-
clockwise moving the hour hand
(C)
forward until the correct date appears in the
date window located at 3 o’clock.
If the date changes when the hour hand
(C)
goes past 12, 12 corresponds to
midnight, otherwise it corresponds to midday.
2. Return the winding crown
(B)
to the initial position
(0)
and close the lever of
the device
(A)
protecting the winding crown.
R
EPLACING THE BUCKLE
The screwdriver supplied with the Panerai Luminor Submersible 1950 3 Days
Automatic Bronzo watches enables the buckle of the strap to be replaced easily.
21 20
INSTRUCTIONS FOR USE
PANERAI LUMINOR SUBMERSIBLE 1950
3 DAYS AUTOMATIC BRONZO
W
INDING THE WATCH
The watch Panerai Luminor Submersible 1950 3 Days Automatic Bronzo has
an automatic mechanical movement with a 3-day power reserve. If the watch
is stopped for a long time, it is recommended that it be rewound with a few
clockwise turns of the winding crown
(B)
in the initial position after raising the
lever of the device protecting the winding crown
(A)
.
C
ALCULATION OF DIVING TIME
Line up the luminous index of the bezel with the minute hand at the start of the
dive. Having done this, the duration can be read at the end of the dive.
0 2 1
A
B
C