DISASSEMBLY
Disassemble the
PANELLIFT® Drywall Lift
as follows for transport and compact storage.
1. Slide the cradle outriggers all the way in.
2. Remove the cross arms by pressing the spring tab on the
bottom and sliding the cross arm out of the tapered socket.
3. Lock the cradle tilt latch and lift the cradle off of the frame.
4. Rotate the winch forward one full rotation.
5. Raise up on the slide bar with your left hand while rotat-
ing the slide bar lock counter-clockwise with your right hand.
6. While holding the slide bar lock in this disengaged
position with your right hand, push down on top of the
telescoping section with your left hand. This action will
cause the winch assembly to move toward the frame.
7. With the telescoping section all the way down, position
the retaining hook over the top as shown.
Push
- 7 -
