Page
45
of
46
IA-CD-0009 Rev. 07
UPS00100DC
© Panduit Corp. 2018
USER MANUAL
7.1.2.
NET LED – Network Status Indicator
Table 8: UPS Network Status Indicators
Indicator State
Summary
Requirement
Steady Off
No Power, No IP
address
The device is powered off or is powered on but with
no IP address configured (Interface Configuration
attribute of the TCP/IP Interface Object).
Flashing Green
No Connections
An IP address is configured, but no CIP connections
are established, and an Exclusive Owner Connection
has not timed out.
Steady Green
Connected
At least one CIP connection (any transport class) is
established, and an Exclusive Owner Connection has
not timed out.
Flashing Red
Connection
Timeout
An Exclusive Owner Connection for which t h is device
is the target has timed o ut, the network status indicator
shall return to steady green o n l y when all timed ou t
Exclusive Owner connections arc reestablished.
Devices that support a single Exclusive Owner
Connection shall transition to steady green wh e n
subsequent Exclusive Owner Connections are
established
Timeout of connections other than Exclusive Owner
Connections shall not cause the indicator to flash red.
The Flashing Red state applies to target co nn ections
only. Originators and CIP Routers shall not enter this
state when an originated or routed CIP connection
times out.
Steady Red
Duplicate IP
For devices that support duplicate IP address
detection, the device has detected that (at least one
of) its IP addresses are already in use.
Flashing
Green/Red
Self-Test
The device is performing its power-on self-test
(POST); During POST the network status indicator
shall alternate flashing green a n d red.
7.1.3.
CHG LED – Charge Status Indicator
Table 9: UPS Charge Status Indicators
Indicator State
Charge Status
Green
Charged
Flashing Green
Charging
Flashing Red
Discharging
Red
Discharged/Disconnected
