SMARTZONE G6 UPS USER MANUAL
71
select the number of days between each automatic self-check test, default is 30 days.
After making all the necessary changes on this page, pres
s the “Save Config” button to
save the changes.
Press the up and over arrow to return to the Battery Self-Check page. NOTE: Upon
returning to this page, the “Self-Check Mode” line will have “Interval” in the field at the
top of the list. The self-check battery test is now scheduled to automatically run once
every number of days as specified on this page.
Figure 62: Auto Self-Check Interval Setting Page
Touch Correction Page
The touch correction page shows an x-y cross hair on the screen. The user must touch
the intersection of the cross hair for the first screen calibration. Another x-y cross hair
appears in another location on the screen, the user must touch the intersection of the
cross hair to complete the screen calibration. Upon completion of the calibration the
FPD automatically transitions back to the Maintenance Menu Page.
Common Pages
The common pages have several pages, the first page provides a menu of the three or
four common pages. Common pages are used to perform manual operations on the
UPS.
Common Menu Page
This is the menu page for the UPS common pages. This page has the same two
banners across the top of the page and the same banner along the bottom of the page
as described in the Status Menu page.
