SMARTZONE UPS INSTALLATION MANUAL
7
Section 2
– Handling (Safety)
Important Safety Warnings
Important safety instructions
– Save these instructions
Overview
Please comply with all warnings and operating instructions. Save this manual for future
reference. Carefully read and follow these instructions before installing the unit. Do not
operate this unit before reading through all safety information and operating instructions
carefully.
Dangerous voltages and high temperatures exist inside the UPS. During the installation,
operation, and maintenance of these units, please abide by the local safety rules and
relative laws. Failure to do so may result in personnel injury or equipment damage.
Safety instructions in this manual act as a supplementary for the local safety rules. No
liability is assumed for not following the safety rules.
Handling Instructions
Before moving the UPS, be sure to use the original packaging materials to prevent or
reduce the possibility of personal injury or damage to the product.
This product may expose you to chemicals including Nickel (Metallic), which is known to
the State of California to cause cancer and birth defects or other reproductive harm. For
more information, go to
Preparation
•
Consideration must be taken if the UPS system is moved directly from a cold to
warm environment. The UPS system must be free of any moisture before
installation. Please allow at least two hours for the UPS system to acclimate to the
environment.
•
Do not install the UPS system near water or in humid environments.
•
Do not install the UPS system where it would be exposed to direct sunlight or near
heat sources.
•
Do not block ventilation holes in the UPS housing.
