Panduit SmartZone EP042, Руководство пользователя

Страница: 45 / 70

SmartZone Gateway EP042 User Manual
- 45 -
Please see Appendix B: Hysteresis Demystified for detailed information.
Limits and Traps
You can set default values for sensor alarm thresholds here. You also can set the default
settings for alarm threshold traps here.
The following thresholds can be set:
l
Upper Control Limit
l
Upper Warning Limit
l
Lower Control Limit
l
Lower Warning Limit
You can apply default trap settings for all of these thresholds. With the trap box deselec-
ted, no SNMP alarm traps will be generated, even when an alarm condition exists for
that threshold.
Repeat Timer
The repeat timer causes alarm traps to be reissued after a specified amount of time if the
alarm condition persists.
Setting the repeat timer to 0 will disable the repeat traps.
The defaults that can be set for Open/Close contacts differ from the Temperature and
Humidity settings.