INSTRUCTIONS CM316B
© Panduit Corp. 2006
FOR TECHNICAL SUPPORT www.panduit.com/resources/install_maintain.asp
Page 1 of 4
P
AN
Z
ONE
Wireless Access Point In Ceiling
Brackets
Part Numbers:
PZWIFICB,PZWIFIDCB,PZW2X2CB,PZW2X2DCB
1
D
A
E
B
C
1.1
Remove knockouts in desired cable entry location:
For Conduit
- Remove knockout “A”, “B” or “C”. This double
knockout accommodates either 1/2” or 3/4” conduit.
Without Conduit - Remove knockout “A” or “B”. Remove the
1/2” diameter opening.
Step 1: Knockout Removal
PANDUIT Part #: PZWIFICB
-
P
AN
Z
ONE
Wireless Access
Point In Ceiling Bracket Kit
See Step 2 & 4 for installation instructions
See Step 4 for installation instructions
Refer to the installation and configuration guidelines provided by the manufacturer of the wireless
access point to determine the optimum enclosure installation location and antenna configuration.
Please read these instructions in their entirety prior to installing the enclosure.
PANDUIT Part #: PZWIFIDCB
-
P
AN
Z
ONE
Wireless
Access Point In Ceiling Bracket Kit
PANDUIT Part #: PZW2X2DCB
-
P
AN
Z
ONE
Wireless Access
Point In Ceiling 2’x 2’ Bracket Kit
PANDUIT Part #: PZW2X2CB
-
P
AN
Z
ONE
Wireless Access Point
In Ceiling 2’x 2’ Bracket Kit
See Step 2-3 for installation instructions
See Step 4 for installation instructions
