Panduit Atlona OmniStream AT-OMNI-512 Скачать руководство пользователя страница 19

Страница: 19 / 96

AT-OMNI-512

LED Indicators

The following table provides a listing of front-panel LED indicators and their status:

Getting Started

LED

Description

PWR

Off

•

If using a PoE switch, make sure that the port on the switch that is

connected to the encoder, has PoE enabled. When the encoder is

powered using PoE, the

PWR

indicator will be green.

• Check the Ethernet cable for possible damage or loose connections.
•

Connect the optional 48V DC power supply (available from atlona.

com) to the encoder. When using an external power supply, the

PWR

indicator will be green.

Red

• The encoder is booting.

Amber

•

The encoder is booting and/or attempting to locate a DHCP server.

Green

• The encoder is ready.

HDMI 1 / 2

Red

• No source is connected to the input.
• Check the HDMI cable for possible damage or loose connections.

Green

• The link integrity between the source and the encoder is good.

LINK 1 / 2

Red

•

The optional 48V DC power supply is connected, but no Ethernet

cables are connected between the switch and the

ETHERNET

port(s).

• Check the Ethernet cable for possible damage or loose connections.

Amber

• The encoder is booting.

Green

• Link integrity is good between the encoder and the network.

Содержание Atlona OmniStream AT-OMNI-512

































































































Результаты поиска

Содержание Atlona OmniStream AT-OMNI-512

Отзывы:

Похожие инструкции для Atlona OmniStream AT-OMNI-512

Бренды по названию

Популярные бренды

Panduit Atlona OmniStream AT-OMNI-512, Руководство пользователя

Результаты поиска

Содержание Atlona OmniStream AT-OMNI-512

Отзывы:

Похожие инструкции для Atlona OmniStream AT-OMNI-512

Бренды по названию

Популярные бренды