Panduit Atlona OmniStream AT-OMNI-121 Скачать руководство пользователя страница 66

Страница: 66 / 129

AT-OMNI-121 / AT-OMNI-122

Configuring Audio Output

In addition to passing audio directly from the encoder to the decoder, both the AT-OMNI-121 and AT-OMNI-122

provide two additional audio options

•

HDMI audio can be de-embedded and output to two-channel analog audio.

•

Two-channel analog audio can be embedded and output over HDMI.

This section covers both methods.

If using a single-channel decoder, only a single

AUDIO IN

and

AUDIO OUT

port

will be available.

De-embedding audio will extract the HDMI LPCM audio and automatically downmix to two-channel analog audio,

using the included captive-screw connectors.

De-embedding Audio

Connect the power supply to the DC 48V connector on the decoder.

Connect the included 5-pin captive screw connectors to the

AUDIO OUT

ports. Refer to

Audio Connectors

(page 18)

for wiring information.

HDMI Output

in the menu.

Scroll down to the

Audio

section and click the

Analog Power

toggle switch to enable it. When enabled, the

toggle switch will be orange. The

Analog Power Status

indicator, above the toggle switch, will be green. This

indicates that the external power supply is connected to the decoder.

Audio from the source will now be heard on the

ANALOG OUT

port of the decoder. Note that when audio is de-

embedded, it will not longer be audible using the HDMI OUT ports on the decoder.

Device Operation

Embedding audio will replace the existing HDMI audio source, normally heard on the output of the decoder.

The analog audio will be heard on the

HDMI OUT

port of the decoder.

Embedding Audio

Connect the power supply to the DC 48V connector on the decoder.

2. Connect the audio source to the

AUDIO IN

ports, using the included 5-pin captive screw connectors. Refer to

Audio Connectors (page 18)

for wiring information.

Click

HDMI Output

in the menu bar.

Scroll down to the

Audio

section and click the

Analog Power

toggle switch to enable it. When enabled, the

toggle switch will be orange. The

Analog Power Status

indicator, above the toggle switch, will be green. This

indicates that the external power supply is connected to the decoder.

Audio from the source will now be heard on the

HDMI OUT

ports on the decoder.

IMPORTANT:

When using analog audio inputs on the OmniStream decoder, the decoder must

be powered using the 48V power supply (AT-PS-48083-C). This power supply is sold separately

and can be purchased from Atlona.

Содержание Atlona OmniStream AT-OMNI-121


































































































































Результаты поиска

Содержание Atlona OmniStream AT-OMNI-121

Отзывы:

Panduit Atlona OmniStream AT-OMNI-121, Руководство пользователя, Страница: 66 / 129

Результаты поиска

Содержание Atlona OmniStream AT-OMNI-121

Отзывы: