manualshive.com logo in svg

Panduit ATLONA OmniStream 101, Руководство пользователя, Страница: 58 / 147

Поделиться
Скачать
Panduit ATLONA OmniStream 101 Скачать руководство пользователя страница 58

Using OmniStream

™

 with Velocity

™ 

Device Manager

58

Device Operation

1.  Click 

Control 

>

 Sites

 in the menu bar to expand the list of buildings and rooms.

2.  Click the desired room from the 

Site

 list.

Creating Video Walls

NOTE:  

It is assumed that the selected room has already been populated with enough displays 

to construct a video wall, along with required number of OmniStream encoders and decoders.  

Refer to the Velocity User Manual for more information on adding displays and OmniStream 

units to a room.

3.  The 

Modify Room

 screen will be displayed.  Click the 

Edit Room Technology

 icon.

4.  Click the 

Add Technology 

icon.

5.  Click the 

Miscellaneous

 > 

Atlona

 > 

Velocity Video Wall: VELOCITY-VIDEO-WALL

.  The video wall technology 

will be added to the room.

6. 

Click the 

Edit Room Device

 icon in the video wall technology window. 

7.  The 

Video Wall 

/

 Pixel Space Dimensions

 dialog will be displayed.  This dialog will automatically be displayed 

when the video wall driver is edited for the first time.  The name of the video wall can be modified in the 

Alias

 

field, if desired.  Close this dialog.

The following section assumes familiarity with site and room management within Velocity.  Refer to the 

Velocity User 

Manual

 for more information on these topics.

The default video wall dimensions are set to 3840 x 2160.  To modify the video wall size, follow Steps 7a through 

7e.  To continue with the default video wall dimensions, click the 

CLOSE

 button and go to step 8.

a.  Click the 

Lock Pixel Space

 toggle switch to disable it.  When disabled, the toggle switch will turn gray.

b.  Under 

Pixel Space Dimensions

, click the drop-down list to select the desired video wall dimensions.

c.  To create a custom size for the video wall, enter the desired dimensions under the 

Custom

 section. 

Enter the width and height directly, or use the spinner controls at the far end of each field, to adjust the 

values.

d.  Save the video wall dimensions by clicking the 

Lock Pixel Space

 toggle switch to enable it.

e.  Click the 

CLOSE

 button to dismiss the dialog.

Содержание ATLONA OmniStream 101




















































































































































Отзывы:

Нет отзывов