Using OmniStream
™
with Velocity
™
Device Manager
23
1. Locate the
IP Input 3
window group and verify that the
Enable
toggle switch is enabled. When enabled, the
toggle switch will be green. Perform the same procedure for the
IP Input 4
window group.
2. Under the
Input 3
window group, enter
226.0.10.1
in the
Multicast Address
field. Under the
IP Input 4
window group, enter
226.0.10.2
in this field. These multicast IP address are the same addresses that were
specified under the
Audio
>
Destination Multicast/Unicast Address
field for the encoders.
3. In the
Port
field, enter
1100
under both
IP Input 3
and
IP Input 4
window groups. These are the same port
settings that were entered under the
Audio
>
Destination UDP Port
field for the encoders.
4. Click the
SAVE
button, under the
IP Input 3
and
IP Input 4
window groups to commit changes.
Audio Configuration
Basic Configuration Tutorial
1
2
3
4
Although there is no hard and fast rule for which
IP Input
window groups should be used for video, audio, and/or
control, it can be helpful to visualize the
IP Input
window groups as columns and rows to better organize the IP data.
The following tables were used to organize the data.
Input Configuration Notes
IP Input
Encoder 1 Information
IP Input 1
Video
(226.0.0.1:1000)
IP Input 3
Audio
(226.0.10.1:1100)
IP Input
Encoder 2 Information
IP Input 2
Video
(226.0.0.2:1000)
IP Input 4
Audio
(226.0.10.2:1100)
Table 2.3 - Video and Audio information for
Encoder #1
and
Encoder #2
.
