Panduit Atlona Omega AT-OME-EX-TX, Руководство по установке, Страница: 5 / 12

5
Installation Guide
AT-OME-EX-TX
LINK Description
Solid yellow The link integrity between the transmitter and the receiver is
good.
Blinking yellow Poor signal integrity between the transmitter and the receiver.
• Make sure that the category cable between the HDBaseT
IN port on the transmitter and the HDBaseT OUT port on
the receiver is secure.
• The category cable may be compromised. Try using a
different category cable. Make sure that the cable is solid
core. Stranded or patch cables are not recommended.
Off The link integrity between the transmitter and the receiver is
compromised.
•
Check the category cable between the HDBaseT IN port
on the transmitter and the HDBaseT OUT port on the
receiver.
PWR Description
Solid green Unit is powered.
Off Unit is not powered.
•
Make sure that the category cable between the HDBaseT
IN port on the transmitter and the HDBaseT OUT port on
the receiver is secure.
• Make sure that the power supply, at the receiver, is
connected to an active AC outlet.
The PWR and LINK LED indicator on both the transmitter and receiver unit provides basic
information on the current status of the AT-OME-EX-TX.
LED Indicators