Panduit Atlona AT-UHD-SW-510W Скачать руководство пользователя страница 75

Страница: 75 / 116

AT-UHD-SW-510W

The Web GUI

System page

Display name

The name of the display, provided in the

Name

field of the

General

tab. Refer to

General page (page 74)

for more

information.

Restart

Click this button to reboot the AT-UHD-SW-510W.

Shutdown

Click this button to shut down the AT-UHD-SW-510W. This should always be performed before disconnecting power
from the unit.

Factory Reset

Click the

Reset

button to reset the AT-UHD-SW-510W to factory-default settings. Resetting to factory-default setting

may take up to five minutes to complete.

Set

(System Date / Time)

Click this button to set the month, day, and time (in UTC).

Set

(Local Date / Time)

Click this button to set the local date and time using the NTP server specified in the

NTP Server

field.

NTP Server

Enter the desired NTP server in this field.

Model Name

The SKU of the product: AT-UHD-SW-510W.

Master Version

The master version of firmware. Always make sure to check the AT-UHD-SW-510W product page, on the Atlona web

site, for the latest version of firmware.

Download

Click this link to download the latest firmware. The most recent firmware version is listed.

Содержание Atlona AT-UHD-SW-510W





















































































































Результаты поиска

Содержание Atlona AT-UHD-SW-510W

Отзывы:

Panduit Atlona AT-UHD-SW-510W, Руководство пользователя, Страница: 75 / 116

Результаты поиска

Содержание Atlona AT-UHD-SW-510W

Отзывы: