manualshive.com logo in svg

Panduit ATLONA AT-UHD-PRO3-1616M, Руководство пользователя, Страница: 57 / 76

Поделиться
Скачать
Panduit ATLONA AT-UHD-PRO3-1616M Скачать руководство пользователя страница 57

AT-UHD-PRO3-1616M

57

Firmware page

UI Firmware

 

The firmware version of the user interface (web GUI).

HDMI Firmware

 

The firmware version for the HDMI driver.  Note that this 

number is not the version of HDMI.

FP Firmware

 

Version of firmware used to operate the front panel 

display.

FPGA Version

 

The FPGA firmware version.

HDBaseT TX VS100

 

Version of firmware used by the VS100 HDBaseT 

transmitter chip.

HDBaseT TX VS10

 

Version of firmware used by the VS10 HDBaseT 

transmitter chip.

Out 1 : Output_1 - Out 10 : Output_16

Version of firmware used by the HDBaseT receiver (if 

connected).  If no receiver is connected, then 

No Link

 

will be displayed in these fields.

Choose File (Matrix)

Click this button to select the firmware file for the matrix.  

Click the 

Update

 button to being the firmware update 

process. 

Choose File (HDBaseT Remote)

Click this button to select the firmware file for the 

HDBaseT remote device (if connected).  Click the 

Update 

button to being the firmware update process.

The Web GUI

This page provides information on the current firmware for the matrix and all connected UHD-EX-based HDBaseT 

receivers/transmitters.  In addition, both matrix and transmitter/receiver (if connected) firmware can be updated here.  

Refer to 

Updating the Firmware (page 67)

 for more information on firmware update procedures.

Содержание ATLONA AT-UHD-PRO3-1616M













































































Отзывы:

Нет отзывов