manualshive.com logo in svg

Panduit ATLONA AT-UHD-PRO3-1616M, Руководство пользователя, Страница: 34 / 76

Поделиться
Скачать
Panduit ATLONA AT-UHD-PRO3-1616M Скачать руководство пользователя страница 34

AT-UHD-PRO3-1616M

34

Input and Output Management

Basic Operation

When dealing with multiple sources and multiple output devices, within the web GUI, it can be useful to assign 

descriptive names to each input and output.

1. 

Login to the web GUI.  Refer to 

Introduction to the Web GUI (page 54)

 for more information.

2.  Click 

I/O

, under the 

Configuration

 section, in the menu bar on the left side of the screen.

3.  Click the 

Input Label

 drop-down list and select the input to be renamed.

4.  Enter the desired name of the input in the 

Input Label

 field.  When entering the name of the input, spaces and 

special characters are not permitted.  In this example, 

In 3 : Input_3

 is being renamed as 

Blu-ray_Player

.

5.  Click the 

Change

 button to save the change.

All instances for the new input name will now be displayed, throughout the web GUI, as shown:

Renaming Inputs

Содержание ATLONA AT-UHD-PRO3-1616M













































































Отзывы:

Нет отзывов