Atlona Technical Support: +1 877.536.3976 option 1
Update Instructions
AT-OME-ST31A
Updating the firmware can be completed using either the USB interface or the web GUI. Atlona recommends
using the web GUI for updating the firmware. However, if a network connection is not available, the AT-OME-ST31A
firmware can be updated using a USB-A to USB mini-B cable.
Using the Web GUI
Requirements:
• AT-OME-ST31A
•
Firmware file
•
Computer running Microsoft Windows
1. Connect an Ethernet cable from the computer, containing the firmware, to the same network where the AT-OME-
ST31A is connected.
2. Launch a web browser and enter the IP address of the AT-OME-ST31A in the address bar.
3. Login to the web GUI, then click
System
in the menu bar, near the top of the screen.
Choose File button
4. Click the
Choose File
button, under the
Firmware Update
section.
5. Browse to the location of the firmware file, select it, and click the
Open
button.
6. Click the
Update
button, under the
Firmware Update
section.
7. The following message box will be displayed.