AT-JUNO-451
15
HDMI OUT
LAN
OPTICAL
RS-232
RX TX
S
IR IN
DC 5V
AT-JUNO-451
INPUT
1
2
3
4
POWER
INPUT
1
2
3
4
INPUT
J
UNO
X
TM
FW
1. Press and release the
INPUT
button on the front panel to cycle between
INPUT 1
,
INPUT 2
,
INPUT 3
, and
INPUT 4 HDMI inputs. The
INPUT 1
is the factory-default setting.
After the
INPUT
button is pressed, the INPUT LED indicator will advance to the next input, in sequence.
In this example,
INPUT 2
is the active input and is indicated by the
INPUT 2
LED indicator on the front panel.
2. Press the
INPUT
button again to switch to
INPUT 3
. Once INPUT 4 is selected, and the
INPUT
button is
pressed again, the unit will return to
INPUT 1
.
Manual input switching can also be performed under the
clicking the
Input Selection
drop-down list and selecting the desired input. In addition, the
x1AVx1
command
can also be used. Refer to the
Application Programmer’s Interface
for more information.
Switching between any of the four input ports can be performed either manually or automatically. The following
section covers both methods.
Input Switching
Manual Switching
NOTE:
The AT-JUNO-451 retains the currently selected input, even after the unit is powered-off then
powered-on.
Basic Operation
HDMI OUT
LAN
OPTICAL
RS-232
RX TX
S
IR IN
DC 5V
AT-JUNO-451
INPUT
1
2
3
4
POWER
INPUT
1
2
3
4
INPUT
J
UNO
X
TM
FW
INPUT 2 LED indicator
