AT-HDVS-200-TX / AT-HDVS-200-TX-PSK
21
Audio page
The Web GUI
Audio Freerun Status
Audio can be passed, without the presence of a video signal. To enable this functionality, click the
Audio Freerun
Status
toggle to the
ON
position. To pass both video and audio, this toggle must be set to the
OFF
position.
Mute
Click this toggle to the
OFF
position to mute all audio on the output.
HDMI Audio
Click this toggle to the
OFF
position to mute only the HDMI audio.
Output
Click and drag this slider bar to adjust the output audio volume. Range: -80 to 0.
Output Bass
Click and drag this slider bar to adjust the bass of the audio output. Range: -12 to 15.
Output Treble
Click and drag this slider bar to adjust the treble of the audio output. Range: -12 to 15.
HDMI Audio
These drop-down lists are only available when the system is in kit mode. Refer to
for more
information.
IMPORTANT
: Setting the
Audio Freerun Status
to
ON
is not recommended. When set to
ON
, both
video auto switching and display control are disabled.
