AT-HDVS-200-TX / AT-HDVS-200-TX-PSK
13
Installation
• Setting DHCP mode
1. Connect to the AT-HDVS-200-TX using RS-232 or Telnet.
2. At the command line, execute the
command using the
on
argument, as shown. All characters are
case-sensitive.
IPDHCP on
Once DHCP is enabled, the unit will be assigned an IP address by the DHCP server (if present).
Using the Web GUI
, in the web GUI, allows the AT-HDVS-200-TX to use either DHCP or static IP mode.
In order to access the web GUI, the IP address of the AT-HDVS-200-TX must be known.
1.
Open the desired web browser and enter the IP address of the AT-HDVS-200-TX.
2.
Log in, using the required credentials. The factory-default username and password are listed below:
Username:
root
Password:
Atlona
3. Click the
System
tab.
4. Click the
IP Mode
toggle to switch between the
DHCP
and
STATIC IP
setting.
When set to
STATIC IP
, the
IP
,
Netmask
, and
Gateway
fields can be modified.
5. Click the
Save
button to save the changes.
