Panduit Atlona AT-HDR-SW-52ED, Руководство пользователя

Страница: 72 / 81

AT-HDR-SW-52ED 72
HDBT page
HDBaseT Zone
There is only one zone. The value in the drop-down list cannot be changed.
Start
Click the Start button to begin the HDBaseT testing process. During testing, the button text will change to
Stop
.
Click the Stop button to halt the HDBaseT testing process. HDBaseT testing can be performed at any time, while
the unit is powered. Refer to the instructions on this web page for information on how to interpret the Bit Error Rate
(BER) and cable test results.
TX Version
The version of the Valens chip on the transmitter.
RX Version
The version of the Valens chip on the receiver.
TMDS Clock
Displays the pixel clock speed. If no source is connected, then this field will display as
None
.
Cable length (Estimated)
This field indicates the approximate length of the category cable connected between the HDBaseT port on the
AT-HDR-SW-52ED and the receiver. If the cable length is less than 15 feet, then this value will be displayed as 0
(zero).
Video Quality (Video BER)
The Bit Error Rate (BER). This field displays either
PASS
or
FAIL
during a test.
Cable Quality Pair (A, B, C, D)
Each of these fields will display either
PASS
or
FAIL
during a test.
HDBaseT Channel Cable Test
Configuration and Management Interfaces