Panduit Atlona AT-HDR-SW-52ED страница 7 Скачать руководство пользователя

Страница: 7 / 81

AT-HDR-SW-52ED

Introduction

Features

Package Contents

•  5x2 HDMI matrix switcher
•  HDBaseT and HDMI outputs with selectable AV switching modes
•  Video, audio, power, and data over category cable utilizing HDBaseT technology
•

Selectable 4K to 1080p downscaling

•  Automatic display control
•  Automatic input selection using hot plug detect and video detection technology
•  Audio de-embedding
•

Delivers return audio from the AT-HDR-EX-100CEA-RX receiver

1 x AT-HDR-SW-52ED

1 x Captive screw connector, 2-pin

1 x Captive screw connector, 3-pin

2 x Captive screw connector, 5-pin

1 x Long rack ear

1 x Short rack ear

2 x Mounting plates

4 x Mounting screws

4 x Rack screws

4 x Feet w/rubber grips

1 x 48 V / 0.83 A DC power supply

The Atlona

AT-HDR-SW-52ED

is a 5×2 HDMI matrix switcher for high dynamic range (HDR) formats. Part of the

comprehensive family of Atlona 4K HDR integration products, it features five HDMI inputs and matrixed or mirrored

HDMI and HDBaseT outputs. The HDBaseT output transmits video, embedded audio, and Ethernet over distances

up to 330 feet (100 meters) to the AT-HDR-EX-100CEA-RX receiver (available separately). The HDR-SW-52ED is

HDCP 2.2 compliant and supports 4K/UHD video @ 60 Hz with 4:4:4 chroma sampling, as well as HDMI data rates

up to 18 Gbps. It is ideal for the latest as well as emerging 4K/UHD and HDR sources and displays, and includes

EDID management features, automatic input switching, and automatic display control. Additionally, 4K downscaling

to 1080p @ 60, 30, or 24 Hz is available for the outputs when connected to an HD display. The HDR-SW-52ED can

de-embed audio from an HDMI input, or return audio from the HDR-EX-100CEA-RX receiver, to S/PDIF or balanced

analog audio outputs. This HDMI switcher can be controlled via Ethernet, RS-232, and IR.

Содержание Atlona AT-HDR-SW-52ED


















































































Результаты поиска

Содержание Atlona AT-HDR-SW-52ED

Отзывы:

Похожие инструкции для Atlona AT-HDR-SW-52ED

Бренды по названию

Популярные бренды

Panduit Atlona AT-HDR-SW-52ED, Руководство пользователя

Результаты поиска

Содержание Atlona AT-HDR-SW-52ED

Отзывы:

Похожие инструкции для Atlona AT-HDR-SW-52ED

Бренды по названию

Популярные бренды