AT-HDR-SW-52ED
50
System Configuration
The AT-HDR-SW-52ED provides easy access to system configuration through the built-in web server, and is the
recommended method to adjust network settings.
1. Log in to the web server.
2. Click
System
in the menu bar.
3.
Locate the MAC address field, as shown below. This is the hardware address of the AT-HDR-SW-52ED.
Getting the MAC Address
Changing the
Network IP Mode
By default, the AT-HDR-SW-52ED is set to DHCP mode. Once connected to a network, and if a DHCP server is
found (or available), the AT-HDR-SW-52ED will be assigned an IP address on the network, and no further network
configuration is required. However, if the AT-HDR-SW-52ED is unable to detect a DHCP server within 15 seconds,
then the unit will use a self-assigned IP address within the range of
169.254.xxx.xxx/16
. The instructions below
will focus on setting the AT-HDR-SW-52ED to static IP mode.
1. Log in to the web server.
2. Click
System
in the menu bar.
Device Operation
MAC address
IMPORTANT:
Before assigning a static IP address to the AT-HDR-SW-52ED, it is recommended
to consult with the network or system administrator and obtain a available IP address.
Assigning the AT-HDR-SW-52ED to an IP address which is already in use can result in network
issues or difficulty in accessing the AT-HDR-SW-52ED.
Содержание Atlona AT-HDR-SW-52ED
Страница 1: ...AtlonaManuals Switchers AT HDR SW 52ED Five Input HDMI Switcher 4K HDR with Mirrored Outputs...
Страница 2: ...AT HDR SW 52ED 2 Version Release Date Notes 1 Jul 2023 Initial release Version Information...
Страница 81: ...US International atlona com 408 962 0515 41 43 508 4321 35295 R1...
