Panduit Atlona AT-HDR-SW-52ED, Руководство пользователя

Страница: 25 / 81

AT-HDR-SW-52ED 25
Analog Audio Output
Device Operation
The AT-HDR-SW-52ED features a separate L/R port on the rear panel. This port provides de-embedding and
conversion of two-channel LPCM audio streams to analog audio. Audio output volume can be controlled using API
commands or the built-in web server.
IMPORTANT: The AT-HDR-SW-52ED will only de-embed two-channel LPCM audio. In
addition, video must accompany the audio at all times. This product does not support audio-
only (“free-run” mode) output.
The included 5-pin captive screw block can be wired to support balanced audio using XLR connectors, or
unbalanced audio using RCA connectors.
*The GND signal, from the 5-pin captive screw connector on
the AT-HDR-SW-52ED, should be tied to pin 1 on both XLR
connectors.
*The GND signal, from the captive screw connector on the
AT-HDR-SW-52ED, should be tied to L- and R- on the captive
screw connector.
GND
+
+
GND
1
2
2
3
3
GND
Balanced Audio (XLR)
Unbalanced Audio (RCA)
Channel Signal (AT-HDR-SW-52ED) Pin (XLR)
R - 3
R + 2
-- GND* 1
L + 2
L - 3
Channel Signal (AT-HDR-SW-52ED) Pin (RCA)
R to GND* --
R + +
-- GND GND
L + +
L to GND* --
L/R Port Wiring