Panduit Atlona AT-HDR-SW-52ED, Руководство пользователя

Страница: 21 / 81

AT-HDR-SW-52ED 21
Device Operation
Auto Switching
By default, Auto Switching is enabled on the AT-HDR-SW-52ED, allowing the unit to automatically switch between
inputs when sources are connected or disconnected.
Enabling / Disabling Auto Switching
1. Log in to the web server.
2. Click A/V Settings in the menu bar.
3. Verify that the Switching Mode is set to Mirrored .
4. Click the Auto Switch mode toggle switch to the
ON
position to enable Auto Switching. This is the default
setting. If Auto Switching is not desired, click this toggle switch to the
OFF
position. If the previously active input
is no longer available, then the AT-HDR-SW-52ED will fallback to any available input.
The AT-HDR-SW-52ED provides Auto Switching capability, which is enabled by default. This feature will
automatically switch the input to the most recently-connected source. If the active source is disconnected, then the
input will automatically be switched to the previously-connected source.
IMPORTANT: The Auto Switching feature is only available when the Switching Mode is set to
Mirrored mode. Refer to Switching Modes (page 18) for more information.
NOTE: The AT-HDR-SW-52ED retains the currently selected input, even after the unit is
powered off then powered on. The system should re-evaluate the Auto Switching logic after
power on and select an input.