Panduit Atlona AT-HDR-SW-52ED, Руководство пользователя

Страница: 15 / 81

AT-HDR-SW-52ED 15
Device Operation
The LED indicators on both the front and rear of the unit provide basic information on the current status of the
AT-HDR-SW-52ED.
LED Indicators
LED Description
HDMI 1 -
HDMI 5
Solid blue The input is the currently selected (active) input.
Off The input is not the active input.
VOLUME
(dBFS)
Solid green Acceptable range for output volume. Audio should be free of clipping. If
audio clipping is heard in this range, check the signal adjustment of the
source device.
Solid amber Audio signals that approach the 0 dBFS level are represented in this range.
If audio clipping is heard, reduce the output gain of the source device until
audio is free of distortion.
Solid red Audio signals which exceed 0 dBFS are represented in this range. Audio
clipping occurs at this level. If clipping is heard, reduce the output gain of
the source device until audio is free of distortion.
POWER Solid blue Unit is powered and in normal operating mode. A/V muting is disabled.
Solid red Unit is powered and in standby mode. In this mode, A/V will be muted.
•
Press the POWER button to place the unit in normal operating mode.
Off Unit is not powered.
• Check the power supply and make sure it is securely fastened to the
captive screw connector on the rear of the unit.
• Make sure that the power supply is connected to an available electrical
outlet and that the outlet is “live” (some outlets are controlled by a wall
switch).
Flashing blue
(slow)
Unit is in Update Mode. Refer to Updating the Firmware (page 73) for
more information.