Atlona Technical Support: +1 877.536.3976 option 1
Update Instructions
AT-HDR-H2H-XX
Updating the firmware can be completed using either the USB interface or the web GUI. Atlona recommends
using the web GUI for updating the firmware. However, if a network connection is not available, the firmware can be
updated using a USB-A to USB mini-B cable. The update process for the AT-HDR-H2H product line is the same.
1. Make sure the unit is powered.
2. Connect an Ethernet cable from the computer, containing the firmware, to the same network where the AT-HDR-
H2H-XX is connected.
3. Go to the
System
page in the web GUI.
Choose File button
Update button
4. Click the
Choose File
button, under the
System
section.
5. Browse to the location of the firmware file, select it, and click the
Open
button on the dialog box.
6. Click the
Update
button in the web GUI.
7. The following dialog will be displayed. Click the
OK
button to begin the firmware update process. Click the
Cancel
button to cancel the process.
8. After the update process has completed, the AT-HDR-H2H-XX will automatically reboot, and the
Login
screen
will be displayed.
9. The update process is complete.
Using the web GUI
Requirements:
•
New firmware - Downloaded from atlona.com
•
IP address of the AT-HDR-H2H-XX
•
Computer on the same network as the AT-HDR-H2H-XX
