manualshive.com logo in svg

Panduit ATLONA AT-HDR-CAT-2, Руководство пользователя

Поделиться
Скачать
Panduit ATLONA AT-HDR-CAT-2 Скачать руководство пользователя страница 49

AT-HDR-CAT-2

49

Appendix

Using USB

Required items:

•  AT-HDR-CAT-2

• 

Computer containing the firmware file.

• 

USB-A to USB-C cable

1.  Disconnect power from the AT-HDR-CAT-2.

2. 

Press and hold the 

EDID

 button while connecting power to the AT-HDR-CAT-2.

3.  Release the 

EDID

 button.  The 

POWER

 button will glow solid red, indicating that the AT-HDR-CAT-2 is in update 

mode.

4. 

Connect the USB-A to USB-C cable between the PC and the firmware port on the AT-HDR-CAT-2.

5. 

A virtual USB drive will be displayed in a pop-up window.

7. 

Delete all files from the virtual drive, if any are present.

8.  Drag-and-drop the firmware file to the drive.  During the firmware update procedure, the 

POWER

 button will 

flash.

9. 

After the file has been copied, disconnect the USB cable from both the computer and the AT-HDR-CAT-2.

10. 

The firmware update process is complete.

Содержание ATLONA AT-HDR-CAT-2























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды