manualshive.com logo in svg

Panduit Atlona AT-ANC-180D, Руководство пользователя, Страница: 62 / 65

Поделиться
Скачать
Panduit Atlona AT-ANC-180D Скачать руководство пользователя страница 62

AT-ANC-108D

62

Appendix

Updating the Firmware

The following procedure outlines the firmware update procedure for the AT-ANC-108D using the USB port.  

Download the firmware from the AT-ANC-108D product page on the Atlona web site.

1.  Disconnect the power from the AT-ANC-108D.

2. 

Press and hold 

Button 1

 while connecting power to the power receptacle on the rear of the unit.  

Button 1

 will 

flash three times, indicating that it is in firmware-update mode.

LAN

AT-ANC-108D

DC 5V

-   +

3. 

Connect a USB to mini-USB cable from the computer to the mini-USB port.

4. 

The USB UPDATE folder will be displayed.  If this folder is not displayed, automatically, select the USB UPDATE 

drive from Windows Explorer.

Power receptacle

Button 1

Mini USB port

NOTE:  

If the AT-ANC-108D is powered using Power over Ethernet (PoE), then substitute the 

Ethernet cable for the power supply in Step 2. 

Содержание Atlona AT-ANC-180D


































































Отзывы:

Нет отзывов