manualshive.com logo in svg

Panduit Atlona AT-ANC-180D, Руководство пользователя, Страница: 14 / 65

Поделиться
Скачать
Panduit Atlona AT-ANC-180D Скачать руководство пользователя страница 14

AT-ANC-108D

14

Configuration and Management Interfaces

System Settings tab

Web Server

The AT-ANC-108D provides a built-in web server for easy configuration and control of the AT-ANC-108D .  Refer to 

Accessing the Web Server (page 25)

 for more information.

IP Mode

 

Click this toggle switch to set the AT-ANC-108D to 

DHCP

 or 

STATIC IP

 mode.  The default setting is 

DHCP

 mode. 

IP

 

Enter the IP address of the AT-ANC-108D in this field.  This field will only be available when 

IP Mode

 is set to 

STATIC IP

.  The default static IP address of the AT-ANC-108D is 

192.168.1.50

. 

Netmask

 

Enter the subnet mask of the AT-ANC-108D in this field.  This field will only be available when 

IP Mode

 is set to 

STATIC IP

. 

Gateway

 

Enter the gateway (router) IP address in this field.  This field will only be available when 

IP Mode

 is set to 

STATIC IP

. 

Telnet Port 

Enter the desired Telnet port (for Telnet sessions) in this field.  The default port is 23.

 

Save

 

Click this button to commit all network changes. 

Network Reset

 

Click this button to reset network setting to factory-default.

Содержание Atlona AT-ANC-180D


































































Отзывы:

Нет отзывов