PANDROL CD200 IQ, Руководство по эксплуатации и обслуживанию

Страница: 8 / 82

8 av 82
OPERATION AND MAINTENANCE MANUAL I ENG_OMM_CD200IQ_P03 I 2023-03-16
@Pandrol 2023
2.2. Safety Actions Prior to Working on the CD200 IQ
• Prior to transportation, ensure that the pathway is free of obstructions or trip hazards..
• When lifting or carrying machinery or equipment, adhere to the permissible per-person lifting
weight. It is the responsibility of the operating company to ensure that the national safety
regulations and guidelines of the trade associations in the respective countries are observed.
• Ensure that a risk assessment has been carried out and that the following aspects with
regard to operators and the transport task have been considered: – Frequency of transport
– Age – Gender – Operator’s state of health – Uneven flooring – Poorly lit worksites – Bad
weather – Working under time pressure – etc.
• Observe the relevant guidelines on lifting and transporting heavy machinery or equipment.
• Mechanical aids to lifting are always the preferred method of handling where possible, e.g.
hoists, tail lift, rail trolleys et
• Your Safety and the persons who work with you are within your responsibility.
• Read and understand all safety regulations and warnings stated both in the operator manual
and in this manual before any installation, operating or performing maintenance on this
machine.
• Locate the emergency stop button before installation, operating or performing maintenance
on this machine.
• Only qualified personnel are permitted to operate the machine during operation.
• The machine is never to be used as a transport vehicle for personnel or equipment.
• The machine is not to be used to recover other vehicles or equipment.
• Make sure that no unauthorized persons are located within the operating area during
installation, use or maintenance.
• Safety regulations regarding authorized personnel within the operating area of the CD200 IQ
are valid for this attachment.
• Improper operation and maintenance of this equipment can be dangerous and could result in
personnel injury.
• Use standards and regulations, accident prevention regulations and regulations concerning
special ambient conditions (e.g. areas potentially endangered by explosive materials, heavy
pollution or corrosive influences).
• It is of great importance that all service, component replacements or other operations in the
electronic or hydraulic systems are accomplished by Qualified Personnel only. And that only
original spare parts are being used