PANDROL CD200 IQ, Руководство по эксплуатации и обслуживанию

Страница: 39 / 82

39 av 82
OPERATION AND MAINTENANCE MANUAL I ENG_OMM_CD200IQ_P03 I 2023-03-16
@Pandrol 2023
7. Installation On Track
7.1. General
The CD200 IQ must be adjusted for the type of rail and clip assembly it is to be used on before
operation on track. The interaction between the clips on the track and the steel shoes on the de-
clipping and the clipping arms must be checked in order not to damage the clips and insulators.
• The CD200 shall always be lifted in its lifting eye located on the top of the main unit
see weight labels on machine.
• CD200 must only be operated by trained personnel and with experienced
workmanship.
• All safety precautions and other requirements is the responsibility of the equipment
operator.
• When placing CD200IQ on track, choose a suitable place with as little interfering
obstacles and with as firm and flat ground as possible.
• Ensure that the road to the workplace is safe and free from interfering obstacles to
avoid accidents.
• Operation or preparation for use can be dangerous and may cause serious personal
injuries if not correctly performed.
• All safety and necessary precautions shall be taken by the operator of the machine.
The machine operator is also responsible that nobody interferes with CD200 IQ whilst
in use and powered.
• When the CD200 IQ operates on track, the de-clipping shoes follow the rail web (just
above rail foot on the inside of the rail). The machine operator must at all times check
that the shoes do not collide with fish plates, welds or other related installations in
the rail, causing serious damages to the CD200 IQ or the rail infrastructure.
Ì
WARNING!