Pando PI-TEP, Руководство по установке

Страница: 76 / 89

INOXPAN S.L.
EN
9
Timer
The timer can be used simultaneously with all the heating zones, and this with different time
settings (from 1 to 999 minutes) for each heating zone.
•
S etting and modification of the cooking time :
A ction Control panel D isplay
Select the power level slide on the
“SLIDER“
[ 1 ] to [ 9 ]
Select the timer Press simultaneously key [ - ] and [ + ] Timer display on
from the timer until the
desired display is on
Decrease the time Press key [ - ] from the timer [ 60 ] to 59, 58...
Increase the time Press key [ + ] from the timer Time increase
After a few seconds, the [ min ] display stops blinking.
The time is confirmed and the timer starts.
•
T o stop the cooking time:
A ction Control panel D isplay
Select the Timer Press simultaneously key [ - ] and [ + ] Timer display on
from the timer until the
desired display is on
Stop the time Press key [ - ] from the timer [ 000 ]
If several timers are activated, repeat the process.
•
E gg timer function:
Egg timer is an independent function. It stops as soon as a heating zone starts working.
When the hob is switched off, the timer continues until it has reached the selected time.
A ction Control panel D isplay
Activate the hob press display [ ] [ 0 ]
Select the Timer Press simultaneously key [ - ] and [ + ] [ 000 ]
from the timer
Decrease the time Press key [ - ] from the timer [ 60 ] to 59, 58...
Increase the time Press key [ + ] from the timer Time increase
After a few seconds, the [ min ] display stops blinking.
The time is confirmed and the timer starts.
•
A utomatic stop at the end of the cooking time:
As soon as the selected cooking time has finished, the timer display is blinking [ 000 ] and a
sound rings.
To stop the sound and the blinking, press the key [ - ] and [ + ].
Stop&Go function
This function brakes the entire hob’s cooking activity temporarily and allows restarting with the
same settings.
•
S tart-up/stop the stop&go function:
A ction Control panel D isplay
Engage stop&go press [ II ] [ II ] and control light on
Stop the stop&go press [ II ]
“Slider” animated
Press on the animated
“slider”
previous settings