Pando PI-TEP, Руководство по установке

Страница: 75 / 89

INOXPAN S.L.
EN
8
Current
power level
Required
power level
Current
power level
Required
power level
Starting-up
•
S tart-up / switch off the hob:
A ction Control panel D isplay
To start press key [ ] [ 0 ]
To stop press key [ ] nothing or [ H ]
•
S tart-up / switch off a heating zone:
A ction Control panel D isplay
To set slide on the
“SLIDER“
[ 1 ] to [ 9 ]
(adjust the power) to the right or to the left
To stop slide to [ 0 ] on
“SLIDER“
[ 0 ] or [ H ]
If no action is taken within 20 seconds, the electronics return in waiting position.
•
Example of power increase:
The segments from the power display are turning on one by one until the required power level is
reached.
•
Example of power decrease:
The segments from the power display are turning off one by one until the required power level is
reached.
Residual heat indication
After the switch off of a heating zone or the complete stop of the hob, the heating zones are still
hot and the symbol [ H ] indicates this on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
Do not touch the heating zones and do not put any heat sensitive objects on them, as long as the
residual heat indicators are switched on.
There are risks of burns and fire.