P&C MWPS60TM-1, Инструкция по эксплуатации

Страница: 13 / 68

13 | EN
Basic settings
Setting the clock
After your microwave oven is first plugged-in or after a power failure, the clock display will flash to
indicate that the time shown is not correct.
To set the clock, proceed as follows:
1. Press the “
+
” key until the Clock Indicator
Light starts to flash.
2. Press the OK key.
3. Press “
-
” and “
+
” keys to set the correct hour
value.
4. Press the OK key to validate the hour value.
The minute numbers will start to flash.
5. Press “
-
” and “
+
” keys to set the correct
minute value.
6. To finish, press the OK key again.
Hiding / Displaying the Clock
If the clock display disturbs you, you can hide it.
1. Press the
“
-
” and “
+
” keys simultaneously
for 5 seconds. The dots that separate the hours
and minutes will flash but the rest of the clock
display will be hidden.
2. If you want to see the clock again, press the
“
-
”
and “
+
” simultaneously again for 5 seconds.