Panasonic YX-09KGC2 страница 23 Скачать руководство пользователя

Страница: 23 / 23

Panasonic Welding Systems (Tangshan) Co., Ltd.

Add

：

No.9 Qingnan Road, New & Hi-Tech Development Zone, Tangshan,Hebei, China

Post Code

：

063020

Tel

：

400-612-5816

URL

：

http://pwst.panasonic.cn/

Printed in China

【

NOTICE

：

Machine export to Europe

】

This product does not meet the requirements specified in the

EC Machinery Directive which is the EU safety ordinance that will

be enforced starting on January 1 , 1995. Please bear in mind that

this product may not be brought as is into the EU after January 1,

1995. The same restriction also applies to any country which has

signed the EEA accord.

【

ATTENTION: The disposal of the product

】

In case of disposal of the product, please sign the assignment

agreement on disposal treatment with the authorized organization

and then assign the organization to dispose the product.

【

The standard of the product

】

This product is designed and manufactured according to GB/T

15579.2-2014/IEC 60974-2:2007 This product may not conform to

the local laws and standards of other countries. Please be

absolutely sure to consult with us before attempting to relocate or

resell this product to other countries.

2021-1

Содержание YX-09KGC2
























Результаты поиска

Содержание YX-09KGC2

Отзывы:

Похожие инструкции для YX-09KGC2

Бренды по названию

Популярные бренды

Panasonic YX-09KGC2, Руководство по эксплуатации

Результаты поиска

Содержание YX-09KGC2

Отзывы:

Похожие инструкции для YX-09KGC2

Бренды по названию

Популярные бренды