background image

ELAN Home Systems

 

 1690 Corporate Circle 

 Petaluma, CA 94954 USA 

tech support: 800.622.3526 • main: 760.710.0990 • sales: 877.289.3526 • email: [email protected] 

©2013 ELAN Home Systems. All rights reserved. ELAN and 

g!

 are trademarks of ELAN Home Systems. All other trademarks are the property of their respective owners.

 

 

Camera Integration Note

Manufacturer: 

Panasonic 

Model Number(s): 

IP Video Cameras (See models list below) 

NOTE: This Integration Note details use of the Panasonic i-
Pro  models. See the Integration Note for Panasonic 
Standard Series driver for consumer model lines

 

Minimum Core Module Version: 

g!

 6.1 

Comments: 

Panasonic IP Setting SW 4.24 
CGI Command Protocol 1.33 

Document Revision Date: 

2/13/2013 

IMPORTANT: This Integration note only applies to the new “Panasonic Pro Series” driver 

available in version 6.1 of g! software. If you are integrating consumer level products (not i-pro) 

please see the appropriate Integration Notes.  

Panasonic i-pro models are only supported in 6.1 or newer release. 

O

VERVIEW AND SUPPORTED FEATURES

 

T

HE 

P

ANASONIC 

C

AMERA 

D

RIVER SUPPORTS THE FOLLOWING FEATURES

Pan / Tilt / Zoom:

 Some Panasonic cameras can be turned to see various locations and zoom in and 

out.  This feature is supported in the driver, and is configurable using a dropdown menu. Note: cameras 
that only have digital zoom may not support zoom through the 

g!

 viewer.  

Presets:

 Some Panasonic cameras support presets, allowing the user to store predefined locations such 

as a driveway or pool.  This feature is supported in the driver, and is configurable using a dropdown 
menu. 

Motion Detection

: Some Panasonic cameras support motion detection to trigger events in the 

g!

 system.  

This feature is supported in the driver, and is configurable using a dropdown menu. 

Video Out: 

Some Panasonic cameras include an analog video output, which can be connected to an 

analog DVR to provide separate recording, or to a TV modulator to enable camera viewing on a 
television. 

Image Flip: 

The camera can be mounted with its base up or down, and the image will appear normal. 

Simply set the “flip 180” option in the 

g!

 Configurator. 

One-Way Audio:

 Some cameras support Listen function for audio. This is supported on applicable 

models. 

T

HESE 

C

AMERAS 

DO

 

NOT

 SUPPORT THE FOLLOWING FEATURES

Any feature not specifically noted as “supported” is not supported. 

Input/Output:

 These cameras include an I/O connector for sensor inputs and alarm outputs.  These are 

not supported by the 

g!

 system at this time. 

Two-Way Audio: 

Two way audio (speaking from a touch screen and outputting from Camera) is not 

supported by the 

g!

 system at this time. 

All Resolutions

: Some models support Megapixel or Widescreen resolutions. This is not supported by 

g!

 

at this time, and only the cameras lower resolutions will be usable in the Viewer. In addition, not all 
cameras support all resolutions (some cameras may only show “Med” and “High” options, for example). 

Содержание WVNP1000 - NETWORK CAMERA









Отзывы: