2.5.2 Configure the settings relating to JPEG images [Image]
Click the [Image] tab on the “Image” page. (
®
For menu display and how to operate, refer to page 34,
"Live" page (Initial display)
Configure the settings relating to the initial images displayed on the “Live” page.
[Initial display stream]
Select the image to display on the “Live” page from the following.
JPEG(1)/JPEG(2)/Stream(1)/Stream(2)/Stream(3)
•
Default:
Stream(1)
Note
•
When “JPEG(1)” or “JPEG(2)” is selected, the refresh interval can be selected.
MJPEG/Refresh interval: 1s/Refresh interval: 3s/Refresh interval: 5s/Refresh interval: 10s/Refresh
interval: 30s/Refresh interval: 60s
•
“Stream(1)”, “Stream(2)”, “Stream(3)” is available when “On” is selected for [Stream transmission].
[Refresh interval (JPEG)*]
Select an interval to refresh the displayed JPEG image from the following.
–
When 30fps mode is selected for [Image capture mode]:
0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps/ 2fps/ 3fps/ 5fps*/ 6fps*/ 10fps*/ 12fps*/ 15fps*/ 30fps*
–
When 25fps mode is selected for [Image capture mode]:
0.08fps/ 0.17fps/ 0.28fps/ 0.42fps/ 1fps/ 2.1fps/ 3.1fps/ 4.2fps*/ 5fps*/ 8.3fps*/ 12.5fps*/ 25fps*
Default:
3fps
Note
•
The refresh interval of JPEG(1) will be as follows.
–
When the 30 fps mode is set for [Image capture mode], the maximum refresh interval will be 10
fps.
–
When the 25 fps mode is set for [Image capture mode], the maximum refresh interval will be 8.3
fps.
•
When “On” is selected for “Stream transmission”, the refresh interval may be longer than the set value
when any value with an asterisk (*) on the right is selected.
•
Depending on factors such as the network environment, the resolution, the image quality, or the number
of computers concurrently accessing the camera, the transmission interval may be longer than the set
value.
•
If images are not delivered in the specified transmission interval, you can make the images be delivered
closer to the specified time by lowering the resolution or image quality.
64
Operating Instructions
2 Settings
