1.3 Record images on the SD memory card manually
Images displayed on the “Live” page can be recorded on the SD memory card manually. This button is operable
only when “Manual” is selected for “Save trigger” on the [SD memory card] tab on the “Basic” page of the setup
menu. (
It is possible to select “Stream(1)”, “Stream(2)”, or “Stream(3)” on “Recording format” of the setup menu.
(
page 58) When “Stream(1)”, “Stream(2)”, or “Stream(3)” is selected, video data are recorded.
1.
Display the “Live” page. (
®
2.
Click the [Rec. on SD] button.
→
The SD recording window will open.
3.
Click the [Start] button to start recording images on the SD memory card. The SD recording status indicator
will light red (
page 12) while images are being recorded on the SD memory card.
The image saving interval can be configured on the [SD memory card] tab of the “Basic” page.
(
®
4.
Click the [Stop] button to stop saving images on the SD memory card.
®
The SD recording status indicator will turn off.
5.
Click the [Close] button to close the window.
Note
•
When the [Start] button is clicked immediately after the [Stop] button is clicked, saving of images may
not start. In this case, click the [Start] button again.
Operating Instructions
23
1 Operations
