[Max bit rate]
Select the bit rate for images to be recorded from the following.
64kbps/ 128kbps/ 256kbps/ 384kbps/ 512kbps/ 768kbps/ 1024kbps/ 1536kbps/ 2048kbps
•
Default:
–
H.264(1): 2048kbps
–
H.264(2): 1536kbps
[Image quality]
Select the quality for H.264 images to be recorded from the following.
Low(Motion priority)/ Normal/ Fine(Image quality priority)
•
Default:
Normal
Note
•
When “Constant bit rate” is selected for “Recording priority”, this setting is available.
[Refresh interval]
Select an interval (I-frame interval; 0.2 - 1 second) to refresh the H.264 images to be recorded from the
following.
0.2s/ 0.25s/ 0.33s/ 0.5s/ 1s
•
Default:
1s
[Maximum file size]
Select the maximum file size for recorded H.264 files (MP4 format).
2MB/20MB
Default:
20MB
[Audio recording]
Select whether or not to save audio data at the same time as recording H.264 images.
•
On:
Saves audio data.
•
Off:
Does not save audio data.
Default:
Off
Note
•
The audio data format used when recording audio is AAC.
•
“Audio recording” is only available when “20MB” is selected for “Maximum file size”.
•
“Audio recording” is only available when “Mic input” or “Interactive(Full-duplex)” is selected for “Audio
transmission/reception” on the [Audio] tab of the “Image/Audio” page. (
®
•
Even if audio is recorded with images, only the images are played when data is played on the
“Playback” page. Recorded audio must be downloaded in order to be played back. (
•
The volume used when saving audio data can be changed in “Mic input volume (Camera to PC)” on
the [Audio] tab of the “Image/Audio” page. (
®
SD memory card information
[Remaining capacity]
Total capacity and remaining capacity of the SD memory card will be displayed.
Depending on the status of the SD memory card, the size indications will differ as follows.
Indication
Description
--------KB/--------KB
No SD memory card is inserted. Failed to obtain available capacity
due to error, etc.
66
Operating Instructions
10 Configure the basic settings of the camera [Basic]
